ICM (Obsolete/Legacy Products)
ICM532
ICM (Obsolete/Legacy Products)
ICM532
3-Phase Surge Protective Device for 3-Phase Delta 600 VAC or Wye 347/600 VAC
The ICM532 is a Type 1 and Type 2 three-phase surge protective device for three-phase Delta and three-phase Wye configurations. When a surge occurs, the ICM three-phase surge protective device will absorb the surge up to the specified limitations of the device. ICM incorporates superior thermally protected metal oxide varistor technology into the three-phase surge suppressors, which allows for safe disabling of the surge elements when a surge exceeds the thermal limits of the device. There is a single status light on the controls which identifies operational status when illuminated. The ICM 3-phase surge protective device can be installed as a Type 1 or Type 2 device for both indoor and outdoor applications- Maximum Surge Current Capacity: 150 kA
- Delta or Wye configuration
- NEMA Type 4X watertight plastic enclosure for outdoor and indoor installation
- Green LED indicates surge protection present
- Easily connect to electrical panel or disconnect for indoor and outdoor applications
- UL Listed Type 1 or Type 2 SPD
- Limited lifetime product, up to a 3-year $10,000 connected equipment warranty
Electrical
- Service Voltage (3-Phase): 600 VAC Delta or 347/600 VAC Wye
- Frequency: 50/60 Hz
- Short Circuit Current Rating (SCCR): 200 kA
- Nominal Discharge Current (In): 20kA
-
SPD Type: Type 1 (can also be used in Type 2 applications)
-
Surge Protection Technology: TFMOV
Maximum Continuous Operation Voltage (MCOV):
- L-L: 920 VAC
- L-N: 460 VAC (for Wye configuration only)
VPR:
- Delta L-L: 2500 VAC
- Wye L-L: 2500 VAC
- Wye L-N: 1500 VAC
Environment
- Operating temperature: -40°F to 185°F (-40°C to 85°C)
Weight/Dimensions
- Length: 4.30”
- Width: 4.10”
- Height: 2.30”
ASCO: 420347Y, 420600D
Eaton: SP1-600Y, SP1-600D, SP2-600Y
ERICO (Critec): TDX50C347/600
Intermatic: AG6503, L5F13Y3DG1
Siemens: TPS3L, TPS3G
Square D: SDSA3650, SDSA3650D